人才信息库
姜胜利
性 别 最高学历 博士研究生
职 称 正高级工程师 专家类别 硕士生导师
部 门 材料环境腐蚀研究中心
通讯地址 辽宁省沈阳市沈河区文萃路62号,中国科学院金属研究所,材料环境腐蚀研究中心
邮政编码 110016 电子邮件 sljiang@imr.ac.cn
电 话 +86-24-23915902 传 真 +86-24-23894149
简历:

  1987年9月-1991年7月:吉林大学化学系,理学学士学位。

  1991年7月-1999年8月:东北制药集团公司,先后任东北制药总厂环保监测站副站长和东北第六制药厂秘书处处长。

  1999年9月-2004年6月:中国科学院金属研究所硕博连读,获得工学博士学位。

  2004年6月至今:中国科学院金属研究所工作,主要从事材料在苛刻工况下的腐蚀与防护研究,现任正高级工程师、辽宁省航发材料摩擦学重点实验室副主任。

  其中:

  2005年9月-2008年7月沈阳黎明航空发动机(集团)有限责任公司企业博士后(在职),从事纳米氧化锆热障涂层的研究。

  2008年9月-2010年6月美国俄亥俄大学博士后,研究方向为油气管道腐蚀、醇胺吸收二氧化碳体系的腐蚀和超临界二氧化碳腐蚀。

  2015年2月-2015年4月加拿大卡尔顿大学高访,研究方向为烧结热障涂层材料。

  学习和工作期间参加了国家自然科学基金重点项目“水环境中典型金属材料腐蚀产物膜形成和破坏规律与机制(51131008)”、“耐多相流腐蚀的金属材料及作用机制研究(59831030)” 和973项目“材料的环境行为与失效机制 (G19990650)”、“核电结构材料早期损伤在线监检测的基础研究(2006CB605004)”等大项目的研究工作,在国内外重要学术期刊上已发表论文60余篇,授权专利11项。

研究领域:

  强腐蚀环境下的腐蚀与防护,侧重于工业腐蚀、多因素交互作用;核电工况的腐蚀磨损问题;醇胺类收集、贮存二氧化碳相关问题;油水润湿性能与腐蚀的关系。

承担科研项目情况:
社会任职:

  中国腐蚀与防护学会防腐蚀施工与技术专业委员会委员、辽宁省腐蚀与防护学会理事。

获奖及荣誉:

  中国腐蚀与防护学会,优秀论文奖,第二作者,2013727,证书编号:2013KJL7013-21

代表论著:

1.Zhixin Dai, Shengli Jiang*, Bi Wu, Likui Ning, Shu Li, Deli Duan*, Synergism between wear and corrosion of Cr26Mo1 ferrite stainless steels in 0.5 molL of sulfuric acid, Tribology International, 178(2), 108007, 2023.

2.Zhixin Dai, Ming Liu, Shengli Jiang*, Mingyang Li, Shu Li, Deli Duan*, Effects of different cathodic reactions on tribocorrosion behaviors of AISI 430 in 0.5 mol/L sulfuric acid, Journal of Materials Engineering and Performance, 31(4), 2708-2714, 2022.

3.W. Emori, S. L. Jiang*, Y. G. Zheng, P. C. Okonkwo, A. I. Obike, P. C. Okafor, Influence of interface-related parameters on some heat stable salts in the corrosion studies of carbon steel for post-combustion CO2 capture, Material Science and Engineering Technology, 52(11), 1185-1200, 2021. .

4.X.G. Yang, D.L. Duan, X. Zhang, S.L. Jiang*, S. Li, H.C. Zhang, Tensile Behaviour of Poly(ether-ether-ketone) (PEEK)/Ni Foam Co-continuous Phase Composites, Journal of Materials Research and Technology, 10(1), 110-120, 2021.

5.Jiaping Zhang, Weihai Xue*, Deli Duan*, Shengli Jiang, Jia Song, Siyang Gao, Shu Li, Effect of the Corrosion of Seal Coatings Used in Aero Engines on Their High-Speed Wear Behaviour. Journal of Thermal Spray Technology, 29(8), 1958–1967, 2020.

6.Yuting Jin, Zhong Li, Enze Zhou, Yassir Lekbach, Dake Xu*, Shengli Jiang**, Fuhui Wang, Sharing riboflavin as an electron shuttle enhances the corrosivity of a mixed consortium of Shewanella oneidensis and Bacillus licheniformis against 316L stainless steel, Electrochimica Acta, 316, 93-104, 2019.

7.X.G. Yang, D.L. Duan, X. Zhang, S.L. Jiang*, H.C. Zhang,Impact behavior of polyetheretherketone (PEEK)/nickel foam co-continuous composites, Journal of Materials Engineering and Performance, 28(10), 6380-6390, 2019.

8.M. Liu, D.L. Duan*, S.L. Jiang, M.Y. Li, S. Li, Tribocorrosion behavior of 304 stainless steel in 0.5 mol/L sulfuric acid, Acta Metallurgica Sinica (English Letters), 31(10), 1049-1058, 2018.

9.N. Tepylo, X. Huang, S.L. Jiang and S. Penttil?, Performance of Aluminide and Cr-Modified Aluminide Pack Cementation-Coated Stainless Steel 304 in Supercritical Water at 700 °C, Journal of Nuclear Engineering and Radiation Science, 5(1): 011014 (8 pages), 2019.

10.S.L. Jiang*, X. Huang, Z. He and A. Buyers, Phase Transformation and Lattice Parameter Changes of Non-trivalent Rare Earth Doped YSZ as a Function of Temperature, Journal of Materials Engineering and Performance, 27(5), 2263-2270, 2018.

11.X.G. Yang, D.L. Duan, S.L. Jiang*, S. Li, H.C. Zhang,Preparation and erosion-corrosion behavior of polyetheretherketone (PEEK)/nickel foam co-continuous composites, Science and Engineering of Composite Materials, 25(2): 289~296, 2018.

12.W. Emori, S. L. Jiang*, D. L. Duan, O. O. Ekerenam, Y. G. Zheng, P. C. Okafor and Y. X. Qiao, Corrosion behavior of carbon steel in amine-based CO2 capture system: effect of sodium sulfate and sodium sulfite contaminants, Materials and Corrosion, 68(6), 674–682, 2017.

13.W. Emori, S.L. Jiang*, D.L. Duan, and Y.G. Zheng, Effects of Sodium Thiosulfate and sodium sulfide on the corrosion behavior of carbon steel in an MDEA-Based CO2 capture process, Journal of Materials Engineering and Performance, 26(1), 335-342, 2017.

14.G.Q. Liu, X.L. Zhang, Y.G. Zheng*, S.L. Jiang*, X. Jiang, Q.X. Yang, F.L. Han, Naphthenic Acid Corrosion Characteristic and Corrosion Product Film Resistance of Carbon Steel and Cr5Mo Low Alloy Steel in Secondary Vacuum Gas Oil, Corrosion Engineering, Science and Technology, 51(6), 445-454, 2016.

15.S.L. Jiang*, X. Huang, H. Zhang, Phase Transformation and Lattice Parameter Changes of Trivalent Rare Earth Doped YSZ as a Function of Temperature, Journal of Materials Engineering and Performance, 25(11), 4686-4694, 2016.

16.Q. Zeng, J. Sun, W. Emori, S.L. Jiang*, Corrosion Behavior of Thermally Sprayed NiCrBSi Coating on 16MnR Low-Alloy Steel in KOH Solution, Journal of Materials Engineering and Performance, 25(5), 1773-1780, 2016.

17.A.L. Ma, S.L. Jiang, Y.G. Zheng*, W. Ke, Corrosion product film formed on the 90/10 copper–nickel tube in natural seawater: Composition/structure and formation mechanism, Corrosion Science, 91: 245-261, 2015.

18.Y. Liu, D.L. Duan*, S.L. Jiang, S. Li. Preparation and its cavitation performance of nickel foam/epoxy/SiC co-continuous composites, Wear, 332-333, 979-987, 2015.

19.B. Jiang, S.L. Jiang*, X. Liu, A.L. Ma, Y.G. Zheng, Corrosion inhibition performance of triazole derivatives on copper–nickel alloy in 3.5 wt.% NaCl solution, Journal of Materials Engineering and Performance, 24(12), 4797-4808, 2015.

20.H.Z. Hu, H.X. Hu, S.L. Jiang, Y.G. Zheng*, Numerical study of flow past a circular cylinder using SST κ-ω, LES and ELES formulations, Progress in Computational Fluid Dynamics, 15(4): 203–213, 2015.

21.A.L. Ma, S.L. Jiang, Y.G. Zheng*, Z.M. Yao, W. Ke, Correlation between microstructure and corrosion behavior of two 90-10 copper-nickel alloy tubes, Acta Metallurgica Sinica (English Letters), 27(4): 730–738, 2014.

22.Deli Duan, Ziyang Hu, Shengli Jiang, Sihan Hou, Shu Li, Corrosive Wear Behaviors of Carbon Steels in Oil/Water Fluid, Tribology Transactions, 57(2): 317-323, 2014.

23.B. Jiang, S.L. Jiang*, A.L. Ma, Y.G. Zheng*, Erosion-corrosion behavior of electroless Ni-P coating on copper-nickel alloy in 3.5 wt.% sodium chloride solution, Journal of Materials Engineering and Performance, 23(1): 230-237, 2014.

24.D.L. Duan, Z. Geng, S.L. Jiang*, S.Li, Failure mechanism of sucker rod coupling, Engineering Failure Analysis, 36(1): 166-172, 2014.

25.B. Jiang, S.L. Jiang*, A.L. Ma, Y.G. Zheng*, Effect of heat treatment on Erosion-corrosion behaviour of electroless Ni-P coatings in saline water, Materials and Manufacturing Processes, 29(1): 74-82, 2014.

26.Q.N. Song, Y.G. Zheng*, S.L. Jiang, D.R. Ni, Z.Y. Ma, Comparison of Corrosion and Cavitation Erosion Behaviors between the As-cast and Friction-stir Processed Nickel Aluminum Bronze, Corrosion, 69 (11): 1111-1121, 2013.

27.Yoon-Seok Choi, Deli Duan, Shengli Jiang, Srdjan Nesic, Mechanistic Modelling of Carbon Steel Corrosion in a MDEA-Based CO2 Capture Process, Corrosion, 69 (6): 551-559, 2013.

28.S.L. Jiang, Y.G. Zheng, D.L. Duan, Failure analysis on weld joints between the elbow and straight pipes of a vacuum evaporator outlet, Engineering Failure Analysis, 27(1): 203-212, 2013.

29.Y. Wang, S.L. Jiang, Y.G. Zheng*, W. Ke, W.H. Sun, X.C. Chang, W.L. Hou, J.Q. Wang, Effect of processing parameters on the microstructures and corrosion behaviour of high-velocity oxy-fuel (HVOF) sprayed Fe-based amorphous metallic coatings, Materials and Corrosion, 64(9): 801-810, 2013.

30.Y. Wang, S.L. Jiang, Y.G. Zheng*, W.Ke, W.H.Sun, J.Q.Wang Effect of molybdenum, manganese and tungsten contents on the corrosion behavior and hardness of iron-based metallic glasses, Materials and Corrosion, 65(7): 733-741, 2014.

31.Y. Wang, S.L. Jiang, Y.G. Zheng*, W.Ke, W.H.Sun, J.Q.Wang,Electrochemical behaviour of Fe-based metallic glasses in acidic and neutral solutions, Corrosion Science, 63(10): 159-173, 2012.

32.C.B. Liu, S.L.Jiang, Y.G. Zheng*, Experimental and computational failure analysis of a valve in a nuclear power plant, Engineering Failure Analysis, 22(6): 1–10, 2012.

33.Y. Wang, S.L. Jiang, Y.G. Zheng, W. Ke, W.H. Sun, J.Q. Wang, Effect of porosity sealing treatments on the corrosion resistance of high-velocity oxy-fuel (HVOF)-sprayed Fe-based amorphous metallic coatings, Surface & Coatings Technology 206 (12): 1307-1318, 2011.

34.H.X. Hu, S.L. Jiang, Y.S. Tao, T.Y. Xiong, Y.G. Zheng, Cavitation Erosion and Jet Impingement Erosion Mechanism of Cold Sprayed Ni-Al2O3 Coating, Nuclear Engineering and Design, 241 (12): 4929-4937, 2011.

35.Y.G. Zheng, H. Yu, S.L. Jiang, Z.M. Yao, Effect of the sea mud on erosion-corrosion behaviors of carbon steel and low alloy steel in 2.4% NaCl solution. Wear, 264 (5): 1051-1058, 2008.

36.D.L. Duan, S. Li, X.J. Ding and S.L. Jiang, Preparation of Ni–Cr alloy foams by electrodeposition technique, Materials Science and Technology, 24(4): 461-466, 2008.

37.D.L. Duan, S. Li, R.L. Zhang and S.L. Jiang, Calculation of apparent resistivity of metallic open cell foams by dodecahedron model, Materials Science and Technology, 23(6): 661-664, 2007.

38.Shengli Jiang, Yugui Zheng, Zhiming Yao, Cavitation erosion behaviour of 20SiMn low alloy steel in Na2SO4 and NaHCO3 solutions, Corrosion Science, 48(9): 2614-2632, 2006.

39.Shengli Jiang, Yugui Zheng, Suzhen Luo, Zhiming Yao, The influence of applied potential on cavitation erosion behavior of type 316L stainless steel in sulfuric acid solution, Corrosion, 62 (2): 99-108, 2006.

授权专利:

1.姜胜利,段德莉,杨晓光,薛伟海,高禩洋,李曙,一种球缺试样工作平面磨平卡具,中国实用新型专利,ZL202022791612.0,授权公告日2021年9月24日。

2.姜胜利,段德莉,杨晓光,戴智鑫,薛伟海,高禩洋,牛聪,崔学顺,一种长寿命高温喷射式液固双相流冲刷腐蚀实验装置,中国实用新型专利,ZL201922081498.X,授权公告日2020年9月18日。

3.段德莉,戴智鑫,姜胜利,薛伟海,高禩洋,李曙,吴彼,一种长寿命内燃机气门,中国实用新型专利,ZL201920183371.6,申请日2019年2月1日,授权公告日2020年1月3日。

4.姜胜利,段德莉,曹逻炜,金宇婷,杨晓光,一种棒状试样的空蚀试验装置,中国实用新型专利,ZL201821643363.7,授权公告日2019年8月16日。

5.姜胜利,段德莉,金宇婷,一种内置式搅拌装置,中国实用新型专利,ZL201820537258.9,授权公告日2019年2月1日。

6.杨晓光,段德莉,薛伟海,高禩洋,姜胜利,刘阳,李曙,用于腐蚀介质冲蚀工况下的聚醚醚酮/泡沫镍基合金双连续复合材料及其制备方法,中国发明专利,ZL201610005393.4,授权公告日:2017年9月15日。

7.姜胜利,段德莉,牛聪,蒋斌,胡怀志,马爱利,宋亓宁,管流式内壁冲刷腐蚀试验装置,中国发明专利,ZL201310248151.4,授权公告日2015年8月26日。

8.姜胜利,蒋斌,胡怀志,郑玉贵,可变径旋转圆环电极,中国发明专利,ZL 201010580680.0,授权公告日2014年3月5日。

9.姜胜利,胡怀志,刘春波,蒋斌,郑玉贵,一种模拟管道内壁冲刷腐蚀的旋转式实验装置,中国发明专利,ZL201010603782.X,授权公告日2014年1月8日。

10.姜胜利,郑玉贵,乔岩欣,陈世铎,姚治铭,崔学顺,喷射式液固双相流冲刷腐蚀实验装置,中国发明专利,ZL200710012708.9,授权公告日2010年9月15日。

11.姚治铭,国旭明,郑玉贵,敬和民,姜胜利,一种水轮机用抗空蚀和磨蚀堆焊焊条,中国发明专利,ZL02132475.1,授权公告日2005年9月14日。

个人网页: