庞建超
工学博士
中国科学院金属研究所，副研究员
1979年生于河北省定州市
联系方式
办公室电话：024-83978226
Email：jcpang@imr.ac.cn
教育和工作经历
1999/09 – 2003/07，河北工业大学，材料科学与工程学院，工学学士
2003/09 –/2007/07，河北工业大学，材料科学与工程学院，工学硕士
2007/09 –2012/08，中国科学院金属研究所，工学博士
2012/09 - 2012/12，中国科学院金属研究所
2013/01 –2016/09，中国科学院金属研究所，助理研究员
2016/10–至今，中国科学院金属研究所，副研究员
研究方向
1) 高强金属材料的疲劳与断裂：高强钢、高强铜合金、微纳米材料；
2) 共晶铸造材料的性能及优化：铝硅合金、蠕墨/球墨铸铁材料；
3) 关键构件服役寿命预测方法：电机转子、内燃机的缸盖和活塞。
主要成果
首次提出疲劳强度与抗拉强度一般关系公式，这种关系适用于许多种金属材料与构件，包括传统材料、新型材料及工程构件；提出“缺陷竞争”疲劳损伤开裂机制，并以高强钢为例从开裂位置变化和断裂力学两方面对疲劳行为和疲劳强度关系进行合理解释；提出控制构件安全服役性能的关键指标、影响因素和寿命预测方法，并开发构件的寿命预测系统。已在Scripta Mater. 和Mater. Sci. Eng. A等SCI刊物上发表论文近20篇，申请专利3项，申请著作权登记1项。
在研项目
作为负责人，主持国家自然科学青年基金(51301179)、国防973项目专题和SYNL青年人才项目各1项，主持企业横向课题6项；参与国家自然科学青年基金和重点基金各2项。
发表论文
[1] Pang JC, Duan QQ, Wu SD, Li SX, Zhang ZF, Fatigue strengths of Cu-Be alloy with high tensile strengths. Scripta Mater. 2010; 63: 1085.
[2] Pang JC, Yang MX, Yang G, Wu SD, Li SX, Zhang ZF, Tensile and fatigue properties of ultrafine-grained low-carbon steel processed by equal channel angular pressing. Mater. Sci. Eng. A 2012; 553: 157.
[3] Pang JC, Li SX, Wang ZG, Zhang ZF, General relation between tensile strength and fatigue strength of metallic materials. Mater. Sci. Eng. A 2013; 564: 331.
[4] Pang JC, Li SX, Zhang ZF, High-cycle fatigue and fracture behaviours of Cu-Be alloy with a wide strength range. Fatigue Fract. Eng. Mater. Struct. 2013; 36: 168.
[5] Pang JC, Li SX, Wang ZG, Zhang ZF, Relations between fatigue strength and other mechanical properties of metallic materials. Fatigue Fract. Eng. Mater. Struct. 2014; 37: 958.
[6] Pang JC*, Nie LL, Zhu LB, Zhang ZJ, Yao G, Mao YX, Chen M, Zhang ZF, Low-Cycle Fatigue Behavior and Life Prediction of Copper Busbar？Adv. Eng. Mater. In press.
[7] Qiu Y, Pang JC*, Li SX, Yang EN, Fu WQ, Liang MX, Zhang ZF, Influence of thermal exposure on microstructure evolution and tensile fracture behaviors of compacted graphite iron. Mater. Sci. Eng. A 2016; 664: 75.
[8] Qiu Y, Pang JC*, Yang EN, Li SX, Zhang ZF, Transition of tensile strength and damage mechanisms of compacted graphite iron with temperature. Mater. Sci. Eng. A, 2016; 667: 290.
[9] Dong FY, Pang JC, Zhang P, Duan QQ, Zhang ZF, Mechanical properties and tensile fracture mechanisms of Fe–Mn–(Al, Si) TRIP/TWIP steels with different ferrite volume fractions. Adv. Eng. Mater. 2015; 17: 1675.
[10] Zhang ZJ, Pang JC, Zhang ZF, Optimizing the fatigue strength of ultrafine-grained Cu-Zn alloys. Mater. Sci. Eng. A, 2016; 666: 305.
[11] Dong FY, Zhang P, Pang JC, Chen DM, Yang K, Zhang ZF, Optimizing strength and ductility of austenitic stainless steels through equal-channel angular pressing and adding nitrogen element. Mater. Sci. Eng. A 2013; 587: 185.
[12] Wang B, Duan QQ, Yao G, Pang JC, Li XW, Wang L, Zhang ZF, Investigation on fatigue fracture behaviors of spot welded Q&P980 steel. Int. J. Fatigue 2014; 66: 20.
[13] Dong FY, Zhang P, Pang JC, Chen DM, Yang K, Zhang ZF, Strength, damage and fracture behaviors of high-nitrogen austenitic stainless steel processed by high-pressure torsion. Scripta Mater., 2015; 96: 5.
[14] Dong FY, Zhang P, Pang JC, Duan QQ, Ren YB, Yang K, Zhang ZF, Microstructure and mechanical properties of high-nitrogen austenitic stainless steels subjected to equal-channel angular pressing. Acta Metall. Sin. (Engl. Lett.). 2016; 29: 140.
[15] Wang B, Duan QQ, Yao G, Pang JC, Zhang ZF, Wang L, Li XW, Fatigue fracture behaviour of spot welded B1500HS steel under tensile-shear load. Fatigue Fract. Eng. Mater. Struct. 2015; 98: 314.
[16] Wang B, Zhang ZJ, Shao CW, Duan QQ, Pang JC, Yang HJ, Li XW, Zhang ZF, Improving the high-cycle fatigue lives of Fe-30Mn-0.9C twinning-induced plasticity steel through pre-straining. Metall. Mater. Trans. A 2015; 46: 3317.
[17] Shao CW, Zhang P, Liu R, Zhang ZJ, Pang JC, Zhang ZF, Low-cycle and extremely-low-cycle fatigue behaviors of high-Mn austenitic TRIP/TWIP alloys: Property evaluation, damage mechanisms and life prediction. Acta Mater. 2016; 103: 781.
[18] Shao CW, Zhang P, Liu R, Zhang ZJ, Pang JC, Duan QQ, Zhang ZF, A remarkable improvement of low-cycle fatigue resistance of high-Mn austenitic TWIP alloys with similar tensile properties: Importance of slip mode. Acta Mater. 2016; 118: 196.
