论文题目 |
作者 |
刊物名称 |
发表年度 |
论文编号 |
Mechanical, oxidation and ablation properties of C/(C-SiC)CVI- (ZrC-SiC)PIP composites |
Jinjin Yao, Shengyang Pang, Chenglong Hu, Jian Li, Sufang Tang*, Hui-Ming Cheng, |
Corrosion Science |
2020 |
|
Interfacial modification and cyclic ablation behaviors of a SiC/ZrB2-SiC/SiC triple-layer coating for C/SiC composites at above 2000°C |
Pengju Tang1, Chenglong Hu2, Shengyang Pang2, Jian Li2, Lei Wang*1, Sufang Tang*2, |
Corrosion Science |
2020 |
|
Synthesis of monolithic carbon aerogels with high mechanical strength via ambient pressure drying without solvent exchange |
Zhi Yang, Jian Li, Xiaojing Xu, Shengyang Pang, Chenglong Hu, Penglei Guo, Sufang Tang*, Hui-ming Cheng |
Journal of Material Science and Technology |
2020 |
|
The Role Of Re In Effecting Isothermal Oxidation Behavior Of β-(Ni, Pt) Al Coating On A Ni-based Single Crystal Superalloy |
Li W, Fu L B, Liu Y D, Zhang W L, Wang T G, Jiang S M, Gong J, Sun C |
CORROSION SCIENCE |
2020 |
|
Preparation And Cyclic Oxidation Behaviour Of Re Doped Aluminide Coatings On A Ni-based Single Crystal Superalloy |
Li W, Sun J, Liu S B, Liu Y D, Fu L B, Wang T G, Jiang S M, Gong J, Sun C |
CORROSION SCIENCE |
2020 |
|
Investigations On The Structure And Properties Of Nanocrystalline Ni-Mo Alloy Coatings |
Liu J H, Li W H, Pei Z L, Gong J, Sun C |
MATERIALS CHARACTERIZATION |
2020 |
|
Influence Of Particle Size And Content On The Friction And Wear Behaviors Of As-annealed Ni-Mo/diamond Composite Coatings |
Liu J H, Liu Y D, Pei Z L, Li W H, Shi W B, Gong J, Sun C |
WEAR |
2020 |
|
Studies On Preparation, Microstructure, Mechanical Properties And Corrosion Resistance Of Ni-Mo/micron-sized Diamond Composite Coatings |
Liu J H, Pei Z L, Shi W B, Liu Y D, Gong J, Sun C |
SURFACE & COATINGS TECHNOLOGY |
2020 |
|
Preparation And Oxidation Behaviour Of NiCrAlYSc Coatings On A Ni-based Single Crystal Superalloy |
Liu S B, Li W, Sun J, Fu L B, Wang T G, Jiang S M, Gong J, Sun C |
CORROSION SCIENCE |
2020 |
|
A Novel Method To Evaluate The Densification Of Abradable Seal Coatings |
Liu Y D, Gu W S, Pei Z L, Gong J, Sun C |
MATERIALS LETTERS |
2020 |
|
Oxidation And Hot Corrosion Behavior Of NiCrAlYSi Plus NiAl/cBN Abrasive Coating |
Liu Y D, Sun J, Pei Z L, Li W, Liu J H, Gong J, Sun C |
CORROSION SCIENCE |
2020 |
|
Investigation On High-speed Rubbing Behavior Between Abrasive Coatings And Al/hBN Abradable Seal Coatings |
Liu Y D, Zhang J P, Pei Z L, Liu J H, Li W H, Gong J, Sun C |
WEAR |
2020 |
|
An Effective Strategy Towards Construction Of CVD SiC Fiber-reinforced Superalloy Matrix Composite |
Zhang H Q, Liu L, Pei Z L, Shi N L, Gong J, Sun C |
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY |
2020 |
|
Effects of Cr and Al Contents on the Preparation of SiC Fiber-Reinforced NiCrAl Alloy Matrix Composite |
Zhang H Q, Niu X X, Pei Z L, Shi N L, Gong J, Sun C |
ACTA METALLURGICA SINICA-ENGLISH LETTERS |
2020 |
|
Influence Of Different Coating Structures On The Oxidation Resistance Of MoSi2 Coatings |
Liu L, Zhang H Q, Lei H, Li H Q, Gong J, Sun C |
CERAMICS INTERNATIONAL |
2020 |
|
Accelerated grain boundary migration in nanolaminated interstitial-free steel during chromizing |
Xie S L, Divinski S V, Lei Y B, Wang Z B |
Materials Research Letters |
2020 |
|
Enhanced fatigue property of welded S355J2W steel by forming a gradient nanostructured surface layer |
An L, Sun Y T, Lu S P, Wang Z B |
Acta Metallurgica Sinica (English Letters) |
2020 |
|
Friction of Stable Gradient Nano-grained Metals |
Chen X, Han Z, Li X Y, Lu K |
SCRIPTA MATERIALIA |
2020 |
|
Subsurface Morphological Pattern, Microstructure and Wear Response of Cu and Cu–Al Alloys Subjected to Unidirectional and Reciprocating Sliding |
Zhang Q C, Chen X, Han Z |
WEAR |
2020 |
|
Improved osteogenic differentiation of human amniotic mesenchymal stem cells on gradient nanostructured Ti surface |
Wang W, Wang Z B, Fu Y T, Dunne N, Liang C, Luo X, Liu K, Li X, Pang X, Lu K |
Journal of Biomedical Materials Research Part A |
2020 |
|
Effect of Gradient Nanostructured Ti on Behaviours of MG63 Cells In Vitro |
Luo X, Liang C, Zhu Y, Cao N, Wang J, Liu K, Zhao H, Wang Z B, Wang W |
Journal of Nanomaterials |
2020 |
|
Bioinformatics analysis and identification of circular RNAs promoting the osteogenic differentiation of human bone marrow mesenchymal stem cells on titanium treated by surface mechanical attrition |
Zhu S, Zhu Y, Wang Z B, Liang C, Cao N, Yan M, Gao F, Liu J, Wang W |
PeerJ |
2020 |
|
Effect of Nb/(Ti + Al) ratio on the phase stability and tensile properties of GH984G alloy |
Wang C S, Chen J M, Zeng F W, Wu Y S, Guo J T, Zhou L Z |
MATERIALS SCIENCE & ENGINEERING A |
2020 |
|
Effect of Al and Ti on precipitation behaviour of γ” in cast alloy 625 |
Yang F, Hou J S, Zhou L Z |
PHILOSOPHICAL MAGAZINE LETTERS |
2020 |
|
Oriented nucleation causing unusual texture transition during static |
Zhao L Y,Yan H,Chen R S,Han E H |
Scripta Materialia |
2020 |
|
Orientations of nuclei during static recrystallization in a cold-rolled Mg–Zn–Gd alloy |
Zhao L Y,Yan H,Chen R S,Han E H |
Journal of Materials Science & Technology |
2020 |
|
The preferential growth and related textural evolution during static recrystallization in a cold-rolled Mg–Zn–Gd alloy |
Zhao L Y,Yan H,Chen R S,Han E H |
Journal of Magnesium and Alloys |
2020 |
|
Quasi-in-situ observations of low-angle grain boundaries, twins and texture evolution during continuous annealing in a cold-rolled Mg-Zn-Gd alloy |
Zhao L Y,Yan H,Chen R S,Han E H |
Materials Characterization |
2020 |
110697 |
Microstructure and texture optimization by static recrystallization originating from {10-12} extension twins in a Mg-Gd-Y alloy |
Lu S H, Wu D, Chen R S, Han E H |
Journal of Materials Science & Technology |
2020 |
|
Reasonable utilization of {10-12} twin for optimizingmicrostructure and improving mechanical property in a Mg-Gd-Y alloy |
Lu S H, Wu D, Chen R S, Han E H |
Materials and Design |
2020 |
|
Effect of cladding parameters on microstructure and defects in direct laser metal deposition of 24CrNiMo steel |
Ebrahimnia M, Xie Y J*,Chi C T |
Journal of Laser Applications |
2020 |
|
不同气氛激光直接沉积成形24CrNiMo合金钢的显微组织和力学性能 |
杨玉乐,迟长泰, 谢玉江 |
焊机学报 |
2020 |
|
Enhanced strain delocalization through formation of dispersive micro shear bands in laminated Ni |
Liang F, Zhang B, Yong Y, Luo X M, Zhang G P |
INTERNATIONAL JOURNAL OF PLASTICITY |
2020 |
|
Effects of surface roughness and build thickness on fatigue properties of selective laser melted Inconel 718 at 650?°C |
Wan H Y, Luo Y W, Zhang B, Song Z M, Wang L Y, Zhou Z J, Li C P, Chen G F, Zhang G P |
INTERNATIONAL JOURNAL OF FATIGUE |
2020 |
|
Effect of heat treatment on microstructures and tensile properties of TA19 alloy fabricated by laser metal deposition |
Wang F, Lei L M, Fu X, Song Z M, Shi L, Zhang B, Zhang G P |
MATERIALS SCIENCE AND ENGINEERING: A |
2020 |
|