课题组在核电、石油化工、氢能、海洋、电子等重大工程材料研究领域共发表高水平论文350余篇，部分文章列表如下：
1.Yusheng Zhang, Hongliang Ming*, Jiang Lai, Lixia Gao, Jianqiu Wang*, En-Hou Han, Fretting wear behaviour of Zr alloy cladding tube mated with Zr alloy dimple under mixed fretting regime in simulated primary water of PWR，Journal of Materials Science & Technology, Accepted（2023）
2. Yusheng Zhang, Jiang Lai, Jiazhen Wang*, Lixia Gao, Hongliang Ming*, Jianqiu Wang, En-Hou Han, Establishment of fretting maps of Zr alloy cladding tube mated with Zr alloy dimple in simulated primary water of pressurized water reactor, Tribology International, 178 (2023) 108065
3. Jianwei Du, Hongliang Ming*, Jianqiu Wang*, En-Hou Han, Hydrogen embrittlement of 20# seamless steel in medium and low pressure gaseous hydrogen, Materials Letters, 334 (2023) 133734
4. X.C. Zhang, D. Wu*, Z.F. Xia, Y.F. Li, J.Q. Wang*, E.H. Han, Study on Surface Fatigue and Metamorphic Layer of Raceway of Hybrid Ceramic Ball Bearing in High-speed Spindle for Machine Tool. Engineering Failure Analysis 143 (2023): 106928.
5. S.H. Lu, D. Wu, M. Yan, R.S. Chen*, Achieving Achieving texture randomization and yield anisotropy reduction in as-rolled Mg-Zn-Y-Zr alloy by multidirectional impact forging. Materials Characterization (2023), accepted.
6. 姚婵、陈健、明洪亮、王俭秋，管线钢氢渗透行为的研究进展，中国腐蚀与防护学报，2023, 43 (2): 209-219
7. Yusheng Zhang, Hongliang Ming*, Jiang Lai, Yifeng Li, Lixia Gao, Jianqiu Wang*, En-Hou Han, Fretting wear behaviour of Zr alloy cladding tube under partial slip regime with different duration in simulated primary water of PWR, Applied Surface Science, 605 (2022) 154861
8. Yusheng Zhang, Jiang Lai, Hongliang Ming*, Lixia Gao, Jianqiu Wang*, En-Hou Han, Effect of normal force on fretting wear behavior of Zirconium alloy tube in simulated primary water of PWR, Acta Metallurgica Sinica（English Letters）, (2022): 1-16
9. Yusheng Zhang, Bin Wu, Hongliang Ming*, Yifeng Li, Zhiming Zhang*, Jianqiu Wang, En-Hou Han, Fretting corrosion-induced microstructural evolution of Alloy 690TT tube in high temperature pressurized water, Corrosion Science, 856 (2022) 143952
10. Baoping Liu, Fanjiang Meng, Zhiming Zhang*, Ling Li*, Jian Chen, Hongliang Ming, Jianqiu Wang, En-Hou Han, Wei Ke, Effect of thermal aging on the microstructure and mechanical property of 410S ferritic stainless steel, Materials Science and Engineering: A, 856 (2022) 143952
11. X.C. Zhang, D. Wu*, Z.F. Xia, Y.F. Li, J.Q. Wang*, E.H. Han, Characteristics and Mechanism of Surface Damage of Hybrid Ceramic Ball Bearings for High-Precision Machine Tool. Engineering Failure Analysis 142 (2022): 106784.
12. L.H. Li, W.H. Liu, F.G. Qi, D. Wu*, Z.Q. Zhang*, Effects of deformation twins on microstructure evolution, mechanical properties and corrosion behaviors in magnesium alloys - A review. Journal of Magnesium and Alloys 10 (2022): 2334-2353.
13. S.H. Lu, D. Wu, M. Yan, R.S. Chen*, Achieving High-Strength and Toughness in a Mg-Gd-Y Alloy Using Multidirectional Impact Forging. Materials 15 (2022): 1508.
14. B. Zhou, D. Wu, Y. Ding, R.S. Chen*, The potential application of hot isostatic pressing for magnesium alloys to reduce shrinkage porosity. International Journal of Metalcasting (2022), DOI: 10.1007/s40962-022-00785-x.
15. Qiong Wu, Chuang Qiao, Lijuan Feng, Long Hao*, Lianfeng Shen, Xizhong An, Improved design of available atmospheric corrosion monitoring sensor with a higher sensitivity to low NaCl deposition, Materials Letters, 328 (2022) 133154
16. Hongyang Zhang, Jianqiu Wang, Long Hao*, Song Zhang, Chunhua Zhang*, The formation and mechanism of oxides film on GCr15 bearing steel under indoor atmospheric exposure, Inorganic Chemistry Communications, 141 (2022) 109538
17. Fengjing Wu, Zhonghua Hu, Xiaojuan Liu, Changwei Su, Long Hao*, Understanding in compositional phases of carbon steel rust layer with a long-term atmospheric exposure, Materials Letters, 315 (2022) 131968
18. Hui Zhao, Xu Sun, Long Hao*, Jianqiu Wang, Jingmei Yang, Corrosion evolution of high-temperature formed oxides film on pure Sn solder substrate, Transactions of Nonferrous Metals Society of China, 32 (2022) 4000
19.Bin Wu, Hongliang Ming*, Fanjiang Meng*, Yifeng Li, Guangqing He, Jianqiu Wang, En-Hou Han, Effects of Surface Grinding for Scratched Alloy 690TT Tube in PWR Nuclear Power Plant: Microstructure and Stress Corrosion Cracking, Journal of Materials Science & Technology, 113 (2022) 229–245
20.Bin Wu, Hongliang Ming*, Zhiming Zhang, Fanjiang Meng*, Guangqing He, Jianqiu Wang, En-Hou Han, Microstructure and stress corrosion cracking behavior of Alloy 690TT steam generator tubes with internal bulge defect, Journal of Nuclear Materials, 563 (2022) 153629.
21.Jiazhen Wang, Hongliang Ming*, Zhiming Zhang, Jian Chen*, Jianqiu Wang, Microstructure and Micro-Hardness of Dissimilar Metal Cladding from a Pipe–Nozzle Mockup for PWR, Coatings, 12(4) (2022) 525.
22.Bin Wu, Fanjiang Meng*, Zhiming Zhang, Rongbo Li, Hongliang Ming*,Jianqiu Wang, En-Hou Han, Stress Corrosion Behavior of Scratched Alloy 690TT Steam Generator Tube in Chlorine-containing High Temperature Pressurized Water, Materials and Corrosion, Accepted (2022)
23.Liu J, Wang J Q*, Zhang Z M, Zheng, Repassivation behavior of alloy 690TT in simulated primary water at different temperatures, Journal of Materials Science & Technology, 202,68(2021), 227-235
24.Bright O. Okonkwo, Hongliang Ming*, Jianqiu Wang*, Fanjiang Meng, Xuelian Xu, En-Hou Han, Microstructural characterization of low alloy steel A508–309/308L stainless steel dissimilar weld metals, International Journal of Pressure Vessels and Piping, 190 (2021) 104297
25.Bin Wu, Hongliang Ming*, Zhiming Zhang, Fanjiang Meng*, Yifeng Li, Jianqiu Wang, En-Hou Han, Effect of Surface Scratch Depth on Microstructure Change and Stress Corrosion Cracking Behavior of Alloy 690TT Steam Generator Tube, Corrosion Science, 192 (2021) 109792
26.Bright O. Okonkwo, Hongliang Ming*, Jianqiu Wang*, En-Hou Han, Ehsan Rahimi, Saman Hosseinpour, Ali Davoodi, A new method to determine the synergistic effects of area ratio and microstructure on the galvanic corrosion of LAS A508/309 L/308 L SS dissimilar metals weld, Journal of Materials Science & Technology, 78 (2021) 38–50
27.Yusheng Zhang, Hongliang Ming*, Lichen Tang, Jianqiu Wang*, Hao Qian, En-Hou Han, Effect of the frequency on fretting corrosion behavior between Alloy 690TT tube and 405 stainless steel plate in high temperature pressurized water, Tribology International, 164 (2021) 107229
28. Bright O. Okonkwo, Hongliang Ming*, Jianqiu Wang*, En-Hou Han, Galvanic corrosion study between low alloy steel A508 and 309/308 L stainless steel dissimilar metals: A case study of the effects of oxide film and exposure time, Journal of Nuclear Materials, 548 (2021): 152853.
29. D. Wu, X.C. Zhang, Y.F. Li, J.Q. Wang*, E.H. Han, Characterization of machined surface quality and near-surface microstructure of a high speed thrust angular contact ball bearing. Journal of Materials Science & Technology 86 (2021): 219-226.
30. Ming H L, Liu X C, Lai J, Wang J Q, Gao L X, Han E H, Fretting wear between Alloy 690 and 405 stainless steel in high temperature pressurized water with different normal force and displacement, JOURNAL OF NUCLEAR MATERIALS, 2020,529(2)151930
31. Ming H L, Liu X C,Yan H L, Zhang Z M, Wang J Q, Gao L X, Lai J, Han E H, SCRIPTA MATERIALIA, 2019, 170, 111-115
32. Ming H L, Zhang Z M, Wang J Q, Han E H, MATERIALS CHARACTERIZATION, 2019, 148, 100-115
33. Liu X C,Ming H L,Zhang Z M, Wang J Q, Tang L C, Qian H, Xie Y C, Han E H, ACTA METALLURGICA SINICA (ENGLISH LETTERS), 2019, 32, 1437-1448
34. Okonkwo B O,Ming H L,Zhang Z M,Wang J Q, Rahimi E, Hosseinpour S, Davoodi A, CORROSION SCIENCE, 2019, 154, 49-60
35. Liu C S, Wang J Q, Zhang Z M, Han E H, Liu W, Liang D, Yang Z T, ACTA METALLURGICA SINICA (ENGLISH LETTERS), 2019, 32, 506-516
36. Li Yifeng, Wang Jianqiu, Han En-Hou, Wu Wenbo, Hanninen Hannu, Multi-scale study of ductility-dip cracking in nickel-based alloy dissimilar metal weld, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 35(4) (2019)545-559
37. Li Yifeng, Wang Jianqiu, Han En-Hou, Characterization of ferroniobium topologically close-packed phase inclusion in nickel-based 152 cladding of dissimilar metal welds, JOURNAL OF NUCLEAR MATERIALS,515(2019)267-275
38. Ming Hongliang, Zhang Zhiming, Wang Jianqiu, Han En-Hou, Microstructure of a domestically fabricated dissimilar metal weld joint (SA508-52M-309L-CF8A) in nuclear power plant, MATERIALS CHARACTERIZATION, 148(2019)100-115
39. Xia Da-Hai，Wang Jianqiu，Wu Zhong，Qin Zhenbo，Xu Likun，Hu Wenbin，Behnamian Yashar，Luo Jing-Li，Sensing corrosion within an artificial defect in organic coating using SECM, SENSORS AND ACTUATORS B-CHEMICAL,280(2019)235-242
40. Liu Canshuai, Wang Jianqiu, Zhang Zhiming, Han En-Hou, Liu Wei, Liang Dong, Yang Zhongtian, Cao Xingzhong, Effect of cumulative gamma irradiation on microstructure and corrosion behaviour of X65 low carbon steel, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 34(2018)2131-2139
41. Ming Hongliang, Liu Xingchen, Zhang Zhiming, Wang Jianqiu, Han En-Hou, Effect of normal force on the fretting wear behavior of Inconel 690 TT against 304 stainless steel in simulated secondary water of pressurized water reactor, TRIBOLOGY INTERNATIONAL,2018(126)133-143
42. Sun Yinghao, Wu Sibo, Xia Da-Hai, Xu Likun, Wang Jianqiu, Song Shizhe, Fan Hongqiang, Gao Zhiming, Zhang Jin, Wu Zhong, Hu Wenbin, Temperature dependence of passivity degradation on UNS N08800 in near neutral crevice chemistries containing thiosulphate, CORROSION SCIENCE,2018(140)260-271
43. Jiang Y. F.,Zhang, B.,Zhou, Y.,Wang, J. Q.,Han, E. -H.,Ke, W.,Atom probe tomographic observation of hydrogen trapping at carbides/ferrite interfaces for a high strength steel, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2018(34)1344- 1348
44. Wang Jiazhen, Wang Jianqiu, Ming Hongliang, Zhang Zhiming, Han, En-Hou, Effect of temperature on corrosion behavior of alloy 690 in high temperature hydrogenated water, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2018(34)1419-1427
45. Ming Hongliang, Wang Jianqiu, Han En-Hou, Comparative study of microstructure and properties of low-alloy-steel/nickel-based-alloy interfaces in dissimilar metal weld joints prepared by different GTAW methods, MATERIALS CHARACTERIZATION, 2018(139)186-196
46. Wang Jiazhen, Wang Jianqiu, Ming Hongliang, Zhang Zhiming, Han En-Hou, Effect of pH on corrosion behavior of 316L stainless steel in hydrogenated high temperature water, MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION,2018(69)580-589
47. Zhu Ruolin, Wang Jianqiu, Ming Hongliang, Zhang Zhiming, Han En-Hou, Evaluation of stress corrosion cracking susceptibility of forged 316 stainless steel in simulated primary water, MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION,2018(69)328-336
48. Ikeuba, Alexander I.,Zhang, Bo,Wang, Jianqiu,Han, En-Han,Ke, Wei,Okafor, Peter C.,SVET and SIET Study of Galvanic Corrosion of Al/MgZn2 in Aqueous Solutions at Different pH,JOURNAL OF THE ELECTROCHEMICAL SOCIETY,2018(165)C180-C194
49. Wang Zeqing, Wang Jianqiu, Behnamian Yashar, Gao Zhiming, Wang Jihui, Xia Da-Hai, Pitting growth rate on Alloy 800 in chloride solutions containing, thiosulphate: image analysis assessment, CORROSION ENGINEERING SCIENCE AND TECHNOLOGY,2018(53)206-213
50. Yifeng Li, Jianqiu Wang, En-Hou Han, Chengdong Yang, Structural, mechanical and corrosion studies of Cr-rich inclusions in 152 cladding of dissimilar metal weld joint, Journal of Nuclear Materials 498 (2018): 9-19. (SCI, IF=2.048)
51. Hongliang Ming, Zhiming Zhang, Jianqiu Wang, En-Hou Han, Peipei Wang, Zhiyuan Sun, Microstructure of a safe-end dissimilar metal weld joint (SA508-52-316L) prepared by narrow-gap GTAW, Materials Characterization, 123 (2017) 233–243 (SCI, IF=2.383)
52. Ruolin Zhu, Jianqiu Wang, Zhiming Zhang, En-Hou Han, Stress corrosion cracking of fusion boundary for 316L/52M dissimilar metal weld joints in borated and lithiated high temperature water, Corrosion Science, 120 (2017): 219-230. (SCI, IF=5.245)
53. Liu, Canshuai, Jianqiu Wang, Zhiming Zhang, En-Hou Han, Studies on corrosion behaviour of low carbon steel canister with and without γ-irradiation in China’s HLW disposal repository, Corrosion Engineering, Science and Technology 52.sup1 (2017): 136-140. (SCI, IF=0.879)
54. Dahai Xia, Bing Zhou, Jianqiu Wang, Zhiming Gao, Jihui Wang, Jingli Luo, Chen Shen, Passivation degradation of Alloy 800 on nucleate boiling surface, Corrosion Engineering, Science and Technology (2017): 1-6. (SCI, IF=0.879)
55. Mingna Wang, Jianqiu Wang, Wei Ke, Corrosion behavior of Sn-3.0 Ag-0.5 Cu lead-free solder joints, Microelectronics Reliability 73 (2017): 69-75. (SCI, IF=1.371)
56. Jie Ding, En-Hou Han, Zhiming Zhang, Siyan Wang, Jianqiu Wang, Influence of sigma phase on corrosion behavior of 316L stainless steel in high temperature and high pressure water, Materials at High Temperatures, 34.1 (2017): 78-86. (SCI, IF=0.802)
57. Sibo Wu, Jianqiu Wang, Shizhe Song, Dahai Xia, Zhiming Zhang, Zhiming Gao, Jihui Wang, Weixian Jin, Wenbin Hui, Factors influencing passivity breakdown on UNS N08800 in neutral chloride and thiosulfate solutions, Journal of The Electrochemical Society 164.4 (2017): C94-C103. (SCI, IF=3.259)
58. L L Li, B Zhang, B Tian, Y Zhou, J Q Wang, E H Han, W Ke, SVET Study of Galvanic Corrosion of Al/Mg2Si Couple in Aqueous Solutions at Different pH, Journal of The Electrochemical Society, 164.6 (2017): C240-C249. (SCI, IF=3.259)
59. Y F Jiang, B Zhang, Y Zhou, J Q Wang, E H Han, W Ke, Atom probe tomographic observation of hydrogen trapping at carbides/ferrite interfaces for a high strength steel. Journal of Materials Science & Technology, Accepted. (SCI, IF=2.764)
60. Y H Fan, B Zhang, H L Yi, G S Hao, Y Y Sun, J Q Wang, E H Han, W Ke, The role of reversed austenite in hydrogen embrittlement fracture of S41500 martensitic stainless steel. Acta Materialia 139 (2017): 188-195. (SCI, IF=5.301)
61. Liu, QL; Zhou, QJ; Venezuela, J; Zhang, MX; Wang, JQ; Atrens, A, A review of the influence of hydrogen on the mechanical properties of DP, TRIP, and TWIP advanced high-strength steels for auto construction, CORROSION REVIEWS, 34 (3)(2016)127-152
62. Jiazhen Wang, Jianqiu Wang, En-Hou Han, Influence of Conductivity on Corrosion Behavior of 304 Stainless Steel in High Temperature Aqueous Environment, J. Mater. Sci. Technol.,32(4)(2016)333-340
63. Siyan Wang, Hongliang Ming, Jie Ding, Zhiming Zhang, Jianqiu Wang？,En-Hou Han, Andrej Atrens, Effect of H3BO3 on corrosion in 0.01 M NaCl solution of the interface between low alloy steel A508 and alloy 52 M, Corrosion Science 102(2016)469-483
64. Hong-Liang Ming, Si-Yan Wang, Zhi-Ming Zhang, Jian-Qiu Wang, En-Hou Han, Wei Ke, Oxidation and Electrochemical Behavior of Monolayer-Graphene-Coated Copper in Simulated Primary Water, Acta Metall. Sin. (Engl. Lett.), 29(1)(2016) 89–93
65. Zhu R L, Wang J Q, Zhang L T, Zhang Z M, Han E-H, Stress corrosion cracking of 316L HAZ for 316L stainless steel/ Inconel 52M dissimilar metal weld joint in simulated primary water, corrosion science, 2016, 11, 112, 373-384
66. Ming H L, Zhu R L, Zhang Z M, Wang J Q, Han E H, Ke W, Su M X, Microstructure, local mechanical properties and stress corrosion cracking susceptibility of an SA508-52M-316LN safe-end dissimilar metal weld joint by GTAW, Materials Science and Engineering A, 2016, 669,p 279-290
67. Ming H L, Wang S Y, Zhang Z M, Wang J Q, Han E H, Ke W, Oxidation and electrochemical behavior of monolayer graphene coated copper in simulated primary water, Acta Metallurgica Sinica（English Letters）, 2016, 29( 1) 89-93
68. Ming H L, Zhang Z M, Xiu P Y, Wang J Q, Han E H, Ke W, Su M X, Microstructure, residual strain and stress corrosion cracking behavior in 316L heat-affected zone, Acta Metallurgica Sinica（English Letters）, 2016, 29(9) 848-858
69. Guan L, Zhou Y, Zhang B, Wang J Q, Han E H and Ke W, Influence of aging treatments on the pitting behaviour associated with the dissolution of active nanoscale β-phase precipitates for an Al-Mg alloy , CORROSION SCIENCE, 2016, 103(2) 255-267
70. Guan L, Zhou Y, Zhang B, Wang J Q, Han E H and Ke W, The electrochemical and morphological characteristics of single metastable pit for 304 stainless steel under potentiostatic polarization, INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2016, 11(3) 2326-2334
71. Guan L, Zhang B, Yong X P, Zhou Y, Wang J Q, Han E H and Ke W, Quantitative understanding of the current response under elastic cyclic loading for 304 stainless steel, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2016, 163(10) C627-C632
72. Wang J Z, Wang J Q, Han E H, 800合金在300 ℃ NaOH和ETA溶液中的腐蚀行为, 金属学报, 2016, 52( 5) 599-606
73. 王俭秋; 黄发; 柯伟, Inconel 690TT和Incoloy 800MA蒸汽发生器管材在高温高压水中的腐蚀行为研究, 金属学报, 2016, 52(10) 1333-1344
74. H.-L. Ming, Z.-M. Zhang, S.-Y. Wang, J.-Q. Wang,E.-H. Han,W. Ke, Short time oxidation behavior of 308L weld metal and 316L stainless steel with different surface state in simulated primary water with 0.1？mg/L dissolved oxygen, Materials and Corrosion, 66(9)(2015)869–881
75.Hongliang Ming, Siyan Wang, Zhiming Zhang, Jianqiu Wang, , En-Hou Han, Wei Ke, Transferred Monolayer Graphene as a Potential Anti-oxidation Barrier for Alloy 690TT in Simulated Primary Water, J. Mater. Sci. Technol., 31(12)(2015)1171–1174
76. Y.-L. Guo, E.-H. Han,J.-Q. Wang, Effects of surface states on the oxidation behavior of 316LN stainless steel in high temperature pressurized water, Materials and Corrosion,66(7)(2015)670–680
77. Jiazhen Wang, Jianqiu Wang, Influence of Ethanolamine on Corrosion of Alloy 690 in Simulated Secondary Water, J. Mater. Sci. Technol., 31(10)(2015) 1039-1046
78. Jiazhen Wang, Xiaohui Li, Jianqiu Wang, En-hou Han, Development of a scratch electrode system in high temperature high pressure water, Corrosion Science，95(2015) 125-132
79. Wang S Y, Ding J, Ming H L, Zhang Z M, Wang J Q, Characterization of low alloy ferritic steel–Ni base alloy dissimilar metal weld interface by SPM techniques, SEM/EDS, TEM/EDS and SVET, Materials Characterization, 100 (2015) 50-60
80. Guo Yueling; Han En-Hou; Wang Jianqiu, EFFECTS OF FORGING AND HEAT TREATMENTS ON STRESS CORROSION BEHAVIOR OF 316LN STAINLESS STEEL IN HIGH TEMPERATURE CAUSTIC SOLUTION, ACTA METALLURGICA SINICA , 51(6)(2015)659-667
81. Guo Yueling, Han En-Hou,Wang Jianqiu, Effects of Forging and Heat Treatments on the Microstructure and Oxidation Behavior of 316LN Stainless Steel in High Temperature Water, J. Mater. Sci. Technol., 31(4)(2015)403–412
82. Ding, J, Zhang, ZM ; Wang, JQ ; Han, EH ; Tang, WB; Zhang, ML; Sun, ZY, MICRO-CHARACTERIZATION OF DISSIMILAR METAL WELD JOINT FOR CONNECTING PIPE-NOZZLE TO SAFE-END IN GENERATION III NUCLEAR POWER PLANT, ACTA METALLURGICA SINICA, 51(4)(2015) 425-439
83. Zhang, ZM; Wang, JQ; Han, EH; Ke, W, ANALYSIS OF SURFACE OXIDE FILM FORMED ON ELETROPOLISHED ALLOY 690TT IN HIGH TEMPERATURE AND HIGH PRESSURE WATER WITH SEQUENTIALLY DISSOLVED HYDROGEN AND OXYGEN, ACTA METALLURGICA SINICA, 51(1)(2015)85-92
84. Ming, Hongliang; Zhang, Zhiming; Wang, Jiazhen; Ruolin Zhu, Jie Ding, Jianqiu Wang , En-Hou Han,Wei Ke, Effect of surface state on the oxidation behavior of welded 308L in simulated nominal primary water of PWR, APPLIED SURFACE SCIENCE, 337(2015) 81-89
85. Zhiming Zhang, Jianqiu Wang, En-Hou Han, Wei Ke,Influence of later-dissolved oxygen on microstructural changes in oxide films formed on Alloy 690TT in hydrogenated primary water, Corrosion Science，94(2015)245-254
86. L. Guan, B. Zhang, X.P. Yong, J.Q. Wang, E.-H. Han, W. Ke,Effects of cyclic stress on the metastable pitting characteristic for 304 stainless steel under potentiostatic polarization, Corrosion Science,93(2015)80–89
87. L. Guan, Y. Zhou, H.Q. Lin,B. Zhang, X.P. Yong, J.Q. Wang, E.-H. Han, W. Ke,Detection and analysis of anodic current transients associated with nanoscale β-phase precipitates on an Al–Mg microelectrode, Corrosion Science,95(2015)6–10
88. Yan Maocheng, Wang Jianqiu, Han En-hou, Sun Cheng, Ke Wei, CHARACTERISTICS AND EVOLUTION OF THIN LAYER ELECTROLYTE ON PIPELINE STEEL UNDER CATHODIC PROTECTION SHIELDING DISBONDED COATING, ACTA METALLURGICA SINICA, 50(9)(2014)1137-1145
89. Zhiming Zhang, Jianqiu Wang, En-Hou Han, Wei Ke, Analysis of Surface Oxide Films Formed in Hydrogenated Primary Water on Alloy 690TT Samples With Different Surface States, J. Mater. Sci. Technol., 30(12)(2014) 1181-1192
90. Litao Zhang, Jianqiu Wang, Effect of temperature and loading mode on environmentally assisted cracking of a domestic forged 316L stainless steel pipe in simulated pressurized water reactor primary water environment，Corrosion Science，2014,87:278-287
91. Hongliang Ming, Jianqiu Wang, Zhiming Zhang, Siyan Wang, En-Hou Han, Wei Ke, Multilayer Graphene: A Potential Anti-oxidation Barrier in Simulated Primary Water, Journal of Materials Science & Technology, 30 (2014) 1084–1087
92. Hongliang Ming, Zhiming Zhang, Jianqiu Wang, En-Hou Han, Wei Ke, Microstructural characterization of an SA508–309L/308L–316L domestic dissimilar metal welded safe-end joint, Materials Characterization, 97 (2014) 101–115
93. Meng Liu, Jianqiu Wang, Wei Ke, En-Hou Han, Corrosion Behavior of X52 Anti-H2S Pipeline Steel Exposed to High H2S Concentration Solutions at 90 C, Journal of Material science and Technology, 30(5) (2014)504-510
94. Shiyan Wang, Jianqiu Wang, Effect of grain orientation on the corrosion behavior of polycrystalline Alloy 690, Corrosion Science 85 (2014) 183-192
95. Jianqiu Wang, Xiaohui Li, Fa Huang, Zhiming Zhang, Jiazhen Wang, R. Staehle, Comparison of Corrosion Resistance of UNS N06690TT and UNS N08800SN in Simulated Primary Water with Various Concentrations of Dissolved Oxygen , Corrosion, Vol. 70, No. 6(2014) 598-614
96. Wang, Mingna; Wang, Jianqiu; Ke, We, Corrosion behavior of Sn-3.0Ag-0.5Cu solder under high-temperature and high-humidity condition, Journal of Materials Science-Materials in Electronics, 25(3)(2014)1228-1236
97. Litao Zhang, Jianqiu Wang, Effect of dissolved oxygen content on stress corrosion cracking of a cold worked 316L stainless steel in simulated pressurized water reactor primary water environment, Journal of Nuclear Materials 446 (2014) 15–26
98. X.Y. Sun, B. Zhang, H.Q. Lin, Y. Zhou, L. Sun, J.Q. Wang, E.H. Han, W. Ke, Atom probe tomographic study of elemental segregation at grain boundaries for a peak-aged Al-Zn-Mg alloy, Corrosion Science 79 (2014) 1-4
99. L. Guan, B. Zhang, J.Q Wang, E.-H. Han, W, Ke, The reliability of electrochemical noise and current transients characterizing metastable pitting of Al-Mg-Si microelectrodes, Corrosion Science 80 (2014) 1-6
100. X.Y. Sun, B. Zhang, H.Q. Lin, Y. Zhou, L. Sun, J.Q. Wang, E.H. Han, W. Ke, Correlations between stress corrosion cracking susceptibility and grain boundary microstructures for an Al–Zn–Mg alloy, Corrosion Science 77 (2013) 107-112.
101. Jianqiu Wang, Fa Huang, En-Hou Han, and Fanjiang Meng, Microscopic Residual Stresses Beneath a Scratch and Their Effects on Scratch-Related Crack Initiation of Thermally Treated UNS N06690 in High-Temperature Pressurized Water. Corrosion: September 2013, Vol. 69, No. 9, pp. 893-899.
102. Fa Huang, Jianqiu Wang, En-Hou Han, Wei Ke, Microstructural characteristics of the oxide films formed on Alloy 690TT in pure and primary water at 325 C, Corrosion Science, 2013, 76, 52-59
103. Xiaohui Li, Jianqiu Wang, En-Hou Han, Wei Ke, Corrosion behavior for Alloy 690 and Alloy 800 tubes in simulated primary water, Corrosion Science, 2013, 67, 169-178
104. Liu, Meng; Wang, Jianqiu; Ke, Wei, Effect of Temperature and H2S concentration on Corrosion of X52 Pipeline Steel in Acidic Solutions, Materials Science Forum 743-744(2013) 589-596
105. Lin, Hongliang; Wang, Jianqiu; Han, Enhou, Effect of Sn Addition on the Corrosion Performance of Cast X-52 in H2S-containing Environment at 60 degrees C, Materials Science Forum 743-744(2013)607-612
106. Zhiming Zhang, Jianqiu Wangy, En-Hou Han and Wei Ke, Characterization of Different Surface States and Its Effects on the Oxidation Behaviours of Alloy 690TT, Journal of Material science and Technology, 28(2012) 353-361.
107. Fa Huang, Jianqiu Wang, En-Hou Han, Wei Ke, Short-time oxidation of Alloy 690 in high-temperature and high-pressure steam and water, Journal of Material science and Technology, 28(2012) 562-568.
108. Mingna Wang, Jianqiu Wang, Hao Feng, Wei Ke, Effects of microstructure and temperature on corrosion properties of Sn-3.0Ag-0.5Cu lead-free solder, J Mater Sci: Mater Electron, 23 (2012) 148-155
109. Mingna Wang, Jianqiu Wang, Hao Feng, Wei Ke, Effect of Ag3Sn intermetallic compounds on corrosion of Sn-3.0Ag-0.5Cu solder under high-temperature and high-humidity condition, Corrosion Science 63( 2012) 20-28
110. Mingna Wang, Jianqiu Wang, Hao Feng, Wei Ke, In-situ observation of fracture behavior of Sn–3.0Ag–0.5Cu lead-free solder during three-point bending tests in ESEM, Materials Science & Engineering A 558 (2012) 649–655
111. Y. Zhou, J.Q. Wang, B. Zhang, W. Ke, E.H. Han, High-temperature fatigue property of Ti46Al8Nb alloy with the fully lamellar microstructure, Intermetallics 24( 2012) 7-14
112. Y. Hu, J. Wang, W. Ke, and E.-H. Han, Intergranular attack and intergranular stress corrosion cracking of Alloy 690 TT in high temperature lead-containing caustic solution, Materials and Corrosion,63(2012)238-246
113. Y. Zhou, G.B. Rao, J.Q. Wang, B. Zhang, Z.M. Yu, W.Ke, E.H.Han, Influence of Ti/TiN bilayered and multilayered films on the axial fatigue performance of Ti46Al8Nb alloy, Thin Solid Films, 519 (2011) 2207-2212
114. Zhiming Zhang, Jianqiu Wang, En-Hou Han, Wei Ke, Influence of dissolved oxygen on oxide films of Alloy 690TT with different surface status in simulated primary water, Corrosion Science， 53 (2011) 3623–3635
115. Z.M. Zhang, J.Q. Wang, E.-H. Han, W. Ke, Trans-twins stress corrosion cracking behaviors of Alloy 690TT in lead-containing caustic solution at 330 ℃, Nuclear Engineering and Design， 241 (2011) 4944–4952
116. J. Hou, Q.J. Peng, T. Shoji, J.Q. Wang, E-H. Han, W. Ke, Effects of cold working path on strain concentration, grain boundary microstructure and stress corrosion cracking in Alloy 600, Corrosion Science 53 (2011) 2956–2962
117. Zhiying Wang, Jianqiu Wang, Enhou Han and Wei Ke, Effect of Potential on SCC Initiation for Pipeline Steel in Near-Neutral pH Solution, Advanced Materials Research, 239-242 (2011) 2091-2095
118. Fanjiang Meng, En-Hou Han，Jianqiu Wang, Zhiming Zhang, Wei Ke. Localized corrosion behavior of scratches on Alloy 690TT, Electrochimica Acta, 56(2011)1781-1785
119. J. Chen, J.Q. Wang, E.H. Han and W. Ke, “Effect of temperature on initial corrosion of an AZ91 magnesium alloy under cyclic wet-dry conditions”, Corrosion Engineering Science and Technology, 43(2011) 277-284
120. Tichun Dan, Tetsuo Shoji, Zhanpeng Lu, Kazuhiko Sakaguchi, Jianqiu Wang, En-Hou Han, Wei Ke, Effects of hydrogen on the anodic behavior of Alloy 690 at 60°C, Corrosion Science, 52(2010)1228 - 1236
121. Y. Hu, J. Wang , W. Ke, and E.-H. Han, Intergranular attack and intergranular stress corrosion cracking of Alloy 690 TT in high temperature lead-containing caustic solution, Materials and Corrosion 2010, 61, No. 9999
122. J. Hou, T. Shoji, Z.P. Lu, Q.J. Peng, J.Q. Wang, E.-H. Han, W. Ke，”Residual strain measurement and grain boundary characterization in the heat-affected zone of a weld joint between Alloy 690TT and Alloy 52”，Journal of Nuclear Materials 397 (2010) 109–115
123. Fanjiang Meng, Jianqiu Wang, En-Hou Han, Wei Ke. The role of TiN inclusions in stress corrosion crack initiation for Alloy 690TT in high-temperature and high-pressure water. Corrosion Science, 52(2010)927-932
124. Wang Zhiying, Wang Jianqiu, Han EnHou, Ke Wei, The mixed mode I/II TGSCC behavior of X-70 pipeline steel, Chinese Science Bulletin, 54(2009)3453-3457
125. Fanjiang Meng, Jianqiu Wang, En-Hou Han, Wei Ke. Effects of scratching on corrosion and stress corrosion cracking of Alloy 690TT at 58°C and 330°C. Corrosion Science, 51 (2009) 2761–2769
126. J. Hou, J.Q. Wang, E.H. Han and W. Ke, “Effect of Mono-tension and Biaxial Tension on Microstructure and Stress Corrosion Cracking of Alloy 690TT”, Materials Science & Engineering A, 518 (2009) 19–26
127. Chen, J; Ai, MR; J.Q. Wang, E.H. Han and W. Ke, “Stress corrosion cracking behaviors of AZ91 magnesium alloy in deicer solutions using constant load”, Materials Science & Engineering A, 515 (2009) 79-84
128. Jian Chen, Jianqiu Wang*, En-Hou Han, Wei Ke，Formation of hydrogen blister on AZ91 magnesium alloy during cathodic charging, Corrosion Science, 51 (2009), pp. 1197-1200
129. Jian Chen, Jianqiu Wang*, En-Hou Han, Wei Ke，In situ observation of pit initiation of passivated AZ91 magnesium alloy，Corrosion Science 51 (2009) 477–484
130. H. Chang *, E.H. Han, J.Q. Wang, W. Ke， Acoustic emission study of fatigue crack closure of physical short and long cracks for aluminum alloy LY12CZ，International Journal of Fatigue, 31 (2009) 403–407
131. Jian Chen, Jianqiu Wang, Enhou Han, Wei Ke，In situ observation of crack initiation and propagation of the charged magnesium alloy under cyclic wet–dry conditions，Corrosion Science 50 (2008) 2338–2341
132. Jian Chen, Junhua Dong, Jianqiu Wang, Enhou Han, Wei Ke，Effect of magnesium hydride on the corrosion behavior of an AZ91 magnesium alloy in sodium chloride solution，Corrosion Science 50 (2008) 3610–3614
133. J. Chen, J.Q. Wang, E.H. Han and W. Ke, “Electrochemical corrosion and mechanical behaviors of the charged magnesium”, Mater. Sci. Eng. A, 494（2008）257-262
134. J. Chen, J.Q. Wang, E.H. Han and W. Ke, “ESEM Observation of the Process of Hydrogen Generation around the Micro-droplets on AZ91 Magnesium Alloy”, Electrochem. Commun., 10(2008)577-581
135. J. Chen, J.Q. Wang, E.H. Han and W. Ke, “States and transport of hydrogen in the corrosion process of an AZ91 magnesium alloy in aqueous solution", Corrosion Science, 50(2008)1292-1305
136. J.Q. Wang, J. Chen, E.H. Han and W. Ke, “Investigation of Stress Corrosion Cracking behaviors of an AZ91 Magnesium Alloy in in 0.1kmol/m3 Na2SO4 Solution using Slow Strain Rate Test”, Mater. Trans., Vol.49,No.5(2008)pp1052-1056
137. MaoCheng Yan, Jianqiu Wang, Enhou Han, Wei Ke. Local environment under simulated disbonded coating on steel pipelines in soil solution. Corrosion Science. 2008,Vol.50,1331-1339
138. J. Chen, J.Q. Wang, E.H. Han and W. Ke, “Effects of dust and salt particles on the formation and spreading of micr-droplets on AZ91 Magnesium Alloy", Corrosion Science, 50(2008)1449-1459
139. J. Chen, J.Q. Wang, E.H. Han and W. Ke, “Effect of Hydrogen on Stress Corrosion Cracking of Magnesium Alloy in 0.1M Na2SO4 Solution”, Mater. Sci. Eng. A, 488（2008）428-434
140. Li, X., Wang, J., Han, E.-H., Ke, W, Stress corrosion cracking of NiTi orthodontie wires in sodium fluoride solution, Advanced Materials Research 32, (2008)79-82
141. Fang B, Han EH, Wang J, et al.Mechanical and environmental influences on stress corrosion cracking of an X-70 pipeline steel in dilute near-neutral pH solutions ，CORROSION 63 (5): 419-432 MAY 2007
142. Bingyan Fang, En-Hou Han, Jianqiu Wang, Ziyong Zhu, Wei Ke, “Stress Corrosion Cracking of an X-70 Pipeline Steel in a Near-Neutral pH Solution Subjected to Constant Load and Cyclic Load Testing”, Corrosion Engineering Sciences and Techno, 42 (2): 123-129 JUN 2007
143. Zhiying Wang, Jianqiu Wang, Enhou Han and Wei Ke. Influence of Intermittent Loading on SCC Behavior for an X70 Pipeline Steel in a Near Neutral pH Solution. Materials and Corrosion. 2007,58(8),583-587
144. Xiaoji Li, Jianqiu Wang, Enhou Han, and Wei Ke, “Influence of fluoride and chloride on corrosion behavior of NiTi orthodontic wires”, Acta Biomaterialia, 3(5), 2007,807-815
145. Huamao Zhou, Jianqiu Wang, Qishan Zang, and Enhou Han, “Study on the effect of Cl- concentration on the corrosion fatigue damage in a rolled AZ31B magnesium alloy by acoustic emission”, Key Engineering Material, 353-358(2007)p327-330
146. J. Chen, J.Q. Wang, E.H. Han and W. Ke, “In-situ Observation of Initial Corrosion of AZ91 Magnesium Alloy in Cyclic Wet-Dry Conditions using Environmental Scanning Electron Microscope”, Corrosion, 63 (7) (2007) 661-671
147. Huamao Zhou, Jianqiu Wang, Qishan Zang, Enhou Han, and Wei Ke, “Characteristics of acoustic emission during fatigue of as-rolled AZ31B magnesium alloy”, Material Sciences Forum, 546-549(2007)579-584
148. Jian Chen, Jianqiu Wang, Enhou Han, and Wei Ke, “In-situ Observation of Initial Corrosion of an AZ91 Magnesium Alloy with Residual Stress in Wet-dry Conditions using Environmental Scanning Electron Microscope”, Material Sciences Forum, 546-549(2007)537-542
149. Jian Chen, Jianqiu Wang, Enhou Han, and Wei Ke, “In-Situ Observation of Formation and Spreading of Micro-droplets on Magnesium under Cyclic Wet-Dry Condition Using ESEM”, Corrosion Science, 49(2007)1625-1634
150. Jian Chen, Jianqiu Wang, Enhou Han, and Wei Ke, “AC Impedance Spectroscopy Study of the Corrosion Behavior of an AZ91 Magnesium Alloy in 0.1 M Sodium Sulfate Solution”, Electrochimica Acta, 52(2007)3299-3309
151. Jianqiu Wang, Nianxing Li, Guangbin Rao, Enhou Han, Wei Ke,“Stress corrosion cracking of NiTi in artificial saliva”, Dental Materials, 23(2007)133-137
152. MaoCheng Yan, Jianqiu Wang, Enhou Han, Wei Ke. Electrochemical measurements by a combination microelectrode in a crevice simulating disbonded coating on pipelines with cathodic protection. Corrosion Engineering, Science and Technology. 42(4) (2007) 42-49
153. Jianqiu Wang, Nianxing Li, Enhou Han, Wei Ke,“Effect of pH, temperature and Cl- concentration on electrochemical behavior of NiTi shape memory alloy in artificial saliva”, J.Mater.Sci. Mater. in Med., 17(2006)885-890
154. Bingyan Fang, En-Hou Han, Jianqiu Wang, Ziyong Zhu, Wei Ke, Effect of Hydrogen in Stress Corrosion Cracking of X-70 Pipeline Steels in Near-Neutral pH Solutions, J.Mater.Sci., 41(2006)1797-1803
155. Guangbin Rao, Jianqiu Wang, Enhou Han, Wei Ke,“Study of residual stress accumulation in TiNi shape memory alloy during fatigue using EBSD technique”, Materials letters, 60 (6): 779-782，2006
156. Atrens, J.Q.Wang, K.Stiller, H.O.Andren, “Atom probe field ion microscope measurements of carbon segregation at an alpha :alpha grain boundary and service failures by intergranular stress corrosion cracking”, Corrosion Science, 48，79-92，2006
157. H.Chang, E.Han, J.Q.Wang, W.Ke “Analysis of Modal Acoustic Emission Signals of LY12CZ Aluminum Alloy at Anodic and Cathodic Polarization”, NDT&E international, 39(2006)8-12
158. Bingyan Fang, Jianqiu Wang, Suhong Xiao, En-Hou Han, Ziyong Zhu, Wei Ke, Stress Corrosion Cracking of X-70 Pipeline Steels by Eletropulsing Treatment in Near-Neutral pH Solution, J.Mater.Sci., 40(24),6545-6552,2005
159. Jian Chen, Jianqiu Wang, Enhou Han, Junhua Dong and Wei Ke,“Corrosion Behavior of AZ91D Magnesium Alloy in Sodium Sulfate Solution”, Material and Corrosion，57 (10) (2006) 789-793
160. H.Chang, E.Han, J.Q.Wang, W.Ke, “Acoustic Emission Study of Corrosion Fatigue Crack Propagation Mechanism for LY12CZ and 7075-T6 Aluminum Alloys”, J.Mater.Sci., 40(21), 5669-5674，2005
161. J.Q.Wang, A.Atrens, “Analysis of service stress corrosion cracking in a natural gas transmission pipeline, active or dormant?”, Engineering Failure Analysis, 11，3-18，2004.
162. J.Q.Wang, A.Atrens, “SCC Initiation of X65 Pipeline Steel in High pH Carbonate/Bicarbonate Solution”, Corrosion Science, 45, 2199-2217, 2003.
163. J.Q.Wang, A.Atrens, “Microstructure and Grain Boundary Microanalysis Of X70 Pipeline Steel”, J. Mater. Sci., 38, 323-330, 2003.
164. BY Fang, A.Atrens, JQ Wang, EH Han, ZY Zhu,W Ke, ”Review of stress corrosion cracking of pipeline steels in low and high pH solutions”, J.Mater.Sci., 38, 127-132, 2003
165. BY Fang, EH Han, ZY Zhu, JQ Wang, W Ke, “Stress corrosion cracking of pipeline steels”, J. Mater Sci & Tech, 18, 3-6, 2002
166. GB Rao, JQ Wang, W Ke, EH Han, ”Fatigue crack propagation behavior of TiNi50.6 shape memory alloy”, J. Mater Sci & Tech, 17, 403-408, 2001
167. GB Rao, JQ Wang, W Ke, EH Han, “Time-dependent deformation behavior of TiNi shape-memory alloy”, Shape memory materials and its applications, Materials Science Forum, 394-3, 333-336, 2001
168. D.R. Cousens, B.J. Wood, J.Q.Wang, A. Atrens, “Implications of specimen preparation and of surface contamination for the measurement of the grain boundary carbon concentration of steels using x-ray microanalysis in an UHVFESTEM”, Surface and Interface Analysis, 29, 23-32, 2000
169. J.Q.Wang, A. Atrens, D.R.Cousens, C.Nockolds and, S. Bulcock, “Study of segregation and carbide at the grain boundary of X65 pipeline steel”, J. Mater. Sci. , 34, 1711-1719, 1999
170. J.Q.Wang, A. Atrens, D.R.Cousens and N.Kinaev, "Microstructure of X52 and X65 Pipeline Steels", J. Mater. Sci., 34, 1721-1728, 1999
171. J.Q.Wang, A. Atrens, D.R.Cousens, C.Nockolds and, S. Bulcock, “Measurement of grain boundary composition for X52 pipeline steel”. Acta Metall, 46, 5677-5687, 1998.
172. J.Q.Wang, J.Li and W.Ke, “Effect of polarization on crack initiation and dislocation behavior near the surface of A537 steel in 3.5% NaCl solution”, J Mater. Sci. Lett., 17, 345-348, 1998.
173. Atrens A, Wang ZF, Wang JQ, SCC initiation for 4340 in distilled water, ADVANCES IN FRACTURE RESEARCH, VOLS 1-6: 375-382,1997
174. J.Li, Y.G.Zheng, J.Q.Wang and W.Ke, “Depassivation and repassivation of AISI321 stainless steel during solid particle impacts in 1M H2SO4 solution”, Wear, 186(2), p562, 1995.
175. Z.F.Wang, J.Li, J.Q.Wang and W.Ke, “Influence of loading waveform on corrosion fatigue crack propagation”, Corro. Sci., 37, p1551, 1995
176. Z.F.Wang, J.Q.Wang, J.Li and W.Ke, “Relation between CF and Crack Propagation Rate and Dissolution Rate at Crack Tip for Iron in 3.5% NaCl Solution”, Scripta Metall.Mater., 32, p487,1995
177. J.Q.Wang, Jin Li, Ziyong Zhu, Wei Ke, Qisan Zang and Zhongguang Wang, “Interaction of Mechanics and Electrochemical Factors during Corrosion Fatigue of Fe-26Cr-1Mo Stainless Steel in 1M H2SO4 Solution”, J.Mater.Sci.Tech., 11, p181, 1995
178. Z.F.Wang, J.Li, J.Q.Wang and W.Ke, “Effect of different concentration inhibitor on corrosion fatigue crack initiation and propagation”, J.Mater.Sci.Tech., 11, p67, 1995
179. J.Q.Wang, J.Li, Z.F.Wang, W.Ke, Z.G.Wang, Q.S.Zang, “Cracking process of Fe-26Cr-1Mo during low cycle corrosion fatigue”, Scripta Metall. Mater., 31, p1561,1994
180. J.Q.Wang, J.Li, Z.F.Wang, W.Ke, Z.G.Wang, Q.S.Zang, “Influence of loading frequency on transient current behavior of Fe-26Cr-1Mo during low cycle fatigue in 1M H2SO4 and 0.6M NaCl solutions”, Scripta Metall. Mater., 29, p1415, 1993
181. J.Q. Wang, Zhongguang Wang, Minya Ma, Qisan Zang and Ziyong Zhu, “The influence of strain amplitude on transient current behavior in corrosion fatigue of Fe-26Cr-1Mo”, Steel Research 63, p453, 1992
182. 刘灿帅,田朝晖, 张志明, 王俭秋, 韩恩厚,金属学报, 2019, 55, 849-858
183. 夏大海 宋诗哲 王俭秋 骆静利. 690和800合金在高温高压水中硫致腐蚀失效研究进展, 金属学报, 10.11900/0412.1961.2017.00198. (SCI, IF=0.523)
184. 郭舒,韩恩厚,王海涛,张志明,王俭秋，核电站316L不锈钢弯头应力腐蚀行为的寿命预测，金属学报，2017, 53 (4): 455-464
185. 明洪亮，张志明，王俭秋，韩恩厚，苏明星， 国产核电安全端异种金属焊接件的微观结构及局部性能研究，金属学报，53 (2017) 57-69 (SCI, IF=0.523)
186. 王俭秋，黄发，柯伟， Inconel 690TT和Incoloy 800MA蒸汽发生器管材在高温高压水中的腐蚀行为研究，金属学报，2016, 52 (10): 1333-1344
187. 王家贞,王俭秋,韩恩厚,800合金在300 ℃ NaOH和ETA溶液中的腐蚀行为,金属学报,2016, 52 (5): 599-606
188. 向超,王家贞,付华萌,韩恩厚,张海峰,王俭秋,张志明,几种高熵合金在核电高温高压水中的腐蚀行为研究,中国腐蚀与防护学报2016, 36 (2): 107-112.
189. 郭跃岭,韩恩厚,王俭秋,锻造态316LN不锈钢在高温高压水中的短期氧化行为,材料研究学报 2015, 29 (6): 401-409.
190. 郭跃岭,韩恩厚,王俭秋,锻造态316LN不锈钢在模拟压水堆一回路水中的初期氧化行为,腐蚀科学与防护技术, 2015, 27 (4): 313-320.
191. 郭跃岭, 韩恩厚, 王俭秋,锻造和热处理对316LN不锈钢在高温碱性溶液中应力腐蚀行为的影响,金属学报 2015, 51 (6): 659-667
192. 丁杰, 张志明, 王俭秋, 韩恩厚, 唐伟宝, 张茂龙, 孙志远, 三代核电接管安全端异种金属焊接接头的显微表征, 金属学报,2015, 51 (4): 425-439.
193. 张志明, 王俭秋, 韩恩厚, 柯伟, 电解抛光态690TT合金在顺序溶氢/溶氧的高温高压水中表面氧化膜结构分析, 金属学报, 2015, 51 (1): 85-92.
194. 郭跃岭,韩恩厚,王俭秋,锻后热处理对核级316LN不锈钢在沸腾MgCl2溶液中应力腐蚀行为的影响,中国腐蚀与防护学报2015, 35 (6): 488-495.
195. 张志明,彭青娇,王俭秋,韩恩厚,柯伟, 核用锻造态316L不锈钢在330 ℃碱溶液中应力腐蚀开裂行为研究,中国腐蚀与防护学报 2015, 35 (3): 205-212.
196. 朱若林,张志明,王俭秋,韩恩厚,核电异种金属焊接接头的应力腐蚀裂纹扩展行为研究进展,中国腐蚀与防护学报 2015, 35 (3): 189-198.
197. 闫茂成, 王俭秋, 韩恩厚, 孙成, 柯伟, 埋地管线阴极保护屏蔽剥离涂层下薄液腐蚀环境特征及演化, 金属学报,2014, 50 (9): 1137-1145.
198. 孟凡江, 王俭秋, 韩恩厚, 柯伟,划伤690TT合金在高温含氧水中应力腐蚀裂纹萌生的研究,中国腐蚀与防护学报 2013, 33 (5): 413-418.
199. 林鸿亮, 王俭秋, 韩恩厚,Cr对铸态X52钢在湿H2S环境中腐蚀行为的影响,中国腐蚀与防护学报 2013, 33 (4): 283-287.
200. 孙荣鹏 王俭秋 韩恩厚,乙醇胺ETA浓度对核电站二回路碳钢和镍基合金690腐蚀的影响,中国腐蚀与防护学报 2013, 33 (2): 97-103.
201. 张利涛,王俭秋, 国产锻造态核级316L不锈钢在高温高压水中的应力腐蚀裂纹扩展行为, 金属学报, 2013, 49（8）, 911-916
202. 姚学军，王俭秋，左景辉，韩恩厚，柯伟，微观组织对X52钢抗H2S腐蚀和开裂性能的影响，中国腐蚀与防护学报，2012，32,95-101
203. 彭青姣，张志明，王俭秋，韩恩厚，柯伟，溶解氢对316L不锈钢在模拟压水堆一回路水中氧化行为的影响，中国腐蚀与防护学报，2012，32,217-222
204. 王志英，王俭秋，韩恩厚，柯伟，阎茂成，张峻巍，刘楚威，涂层剥离条件下X70管线钢的应力腐蚀裂纹萌生行为，金属学报，2012，48（10）1267-1272
205. 郦晓慧，王俭秋，韩恩厚，柯伟，核级商用690合金和800合金在模拟压水堆核电站一回路高温高压水中的腐蚀行为研究，金属学报，48（2012）941-950
206. 孟凡江，王俭秋，韩恩厚，庄子哲雄，柯伟，690TT合金划痕显微组织及划伤诱发的应力腐蚀，金属学报，2011 Vol. 47 (7): 839-846
207. 黄发，王俭秋，韩恩厚，柯伟，硼酸缓冲溶液中Cl-浓度和溶液温度对690合金腐蚀行为的影响，金属学报，47(2011)809-815.
208. 张志明，王俭秋，韩恩厚，柯伟, 打磨态690TT合金经不同时间浸泡后表面氧化膜结构分析, 金属学报, 47(2011) 823-830
209. 张志明，王俭秋，韩恩厚，柯伟, 电解抛光态690TT合金经不同时间浸泡后表面氧化膜结构分析, 金属学报, 47(2011) 831-838
210. 郦晓慧，黄发，王俭秋，韩恩厚，柯伟，TiN夹杂物对690合金管在高温高压水中的腐蚀和应力腐蚀行为的影响，金属学报，47（2011）847-852
211. 郦晓慧，王俭秋，韩恩厚，柯伟，不同镍基堆焊材料在高温高压水中的应力腐蚀行为研究，中国腐蚀与防护学报，31（2011）436-440
212. 黄发，王俭秋，韩恩厚，柯伟，pH值对690合金在NaCl环境中电化学行为的影响，第六届全国腐蚀大会，优秀论文特等奖，ISTP检索.
213. 王明娜，王俭秋，冯皓，柯伟，无铅焊料的腐蚀性能研究现状及展望，中国腐蚀与防护学报，31（2011）250-254
214. 胡轶嵩，王俭秋，柯伟，韩恩厚. 高温含铅碱液中690TT合金氧化膜的研究. 金属热处理学报，2011,32(4):116-120
215. 胡轶嵩，王俭秋，柯伟，690TT合金在高温含铅碱液中腐蚀行为的研究，中国腐蚀与防护学报，2010, 30 (6): 427-432
216. 黄发;陈健;王俭秋; 铸造 AZ91 镁合金在 CO32-/HCO3- 体系中的应力腐蚀行为，中国腐蚀与防护学报；2010,30(5):347-353
217. 韩恩厚，王俭秋，吴欣强、柯伟，核电高温高压水中不锈钢和镍基合金的腐蚀机制，金属学报，2010 Vol. 46 (11): 1379-1390
218. 但体纯，韩恩厚，吕战鹏，柯伟，王俭秋，T. Shoji. 690合金在高温高压水中的应力腐蚀裂纹扩展行为. 金属学报，2010，Vol. 46 (10): 1267-1274
219. 侯娟，彭群家，庄子哲雄，王俭秋，柯伟，韩恩厚，镍基合金焊接过渡区微观结构及应力腐蚀行为研究，金属学报，2010，Vol. 46 (10): 1258-1266
220. 但体纯，王俭秋，韩恩厚，柯伟.压水堆核电站蒸汽发生器用600合金管在含铅高温碱溶液中的应力腐蚀行为研究. 腐蚀科学与防护技术，2008，Vol. 20 (5): 313-316
221. 周华茂, 王俭秋, 张 波, 韩恩厚, 臧启山. 轧制AZ31B镁合金在空气和NaCl溶液中疲劳行为，中国腐蚀与防护学报. 29（2），2009，132-136
222. 周华茂, 王俭秋, 张 波, 韩恩厚, 臧启山. 轧制AZ31B镁合金腐蚀疲劳过程中的声发射信号分析.中国腐蚀与防护学报. 29（2），2009，82-87
223. 但体纯，王俭秋，韩恩厚，柯伟.压水堆核电站蒸汽发生器用600合金管在含铅高温碱溶液中的应力腐蚀行为研究. 腐蚀科学与防护技术，2008，Vol. 20 (5): 313-316
24. 王志英，王俭秋，韩恩厚，柯伟.力学因素对管线钢应力腐蚀裂纹萌生的影响. 中国腐蚀与防护学报. 28（5），2008，282-286
225. 李红，张波，王俭秋，韩恩厚，柯伟，“合金元素Sb和Mn对Zn腐蚀的影响”，中国腐蚀与防护学报，18（5），2008，257-264
226. 周海波，张波，朱丽娟，王俭秋，韩恩厚，柯伟，“模拟溶液中Mn对Zn腐蚀的作用机制”，腐蚀科学与防护技术，20（6），2008，395-399
227. 闫茂成, 翁永基, 王俭秋, 柯伟. 电化学充氢过程中X70钢氢吸收的新方法, 材料研究学报, 2007. 4(343-347).
228. 闫茂成,王俭秋,柯伟, 韩恩厚. 埋地管线剥离覆盖层下阴极保护有效性. 中国腐蚀与防护学报. 2007，5，257-262
229. 李年杏，王俭秋，韩恩厚，柯伟, “温度、pH和Cl-浓度对NiTi形状记忆合金电化学行为影响的研究”, 腐蚀与防护学报,26（4），202-206，2006
230. 常红，韩恩厚，王俭秋，柯伟，“飞机蒙皮涂层对LY12CZ铝合金腐蚀疲劳寿命的影响”，金属腐蚀与防护学报，26（1）, 34-36, 2006
231. 常红，韩恩厚，王俭秋，柯伟，“阴极极化对LY12CZ铝合金腐蚀疲劳寿命的影响”，金属学报，41, 556-560, 2005
232. Rao Guang-bin; Wang Jian-qiu; Han En-hou; Ke Wei，In situ study of evolution of stress-induced martensitic transformation in TiNi shape memory alloy during cyclic deformation ， Chinese Journal of Nonferrous Metals vol.15, no.1 : 12-18, Jan. 2005
233. 方丙炎，韩恩厚，王俭秋，朱自勇，柯伟，“时效温度和时间对环氧涂层的影响”, 金属学报，39, 533-540, 2003
234. 饶光斌，王俭秋，柯伟，韩恩厚, “应力诱发马氏体相变对TiNi形状记忆合金疲劳过程影响的原位实验观察”, 金属学报,38, 575-582, 2002.
235. 方丙炎，王俭秋，朱自勇，韩恩厚，柯伟，“埋地管线在近中性和高pH 溶液的应力腐蚀开裂”, 金属学报, 37, 453-458, 2001.
236. 张丽，王俭秋，关辉，韩恩厚，柯伟，“超临界水氧化技术及其环境中材料的腐蚀研究现状”，腐蚀科学与防护技术, 13（5）, p270, 2001
237. 方丙炎，朱自勇，韩恩厚，王俭秋，柯伟，“16MnR管线钢在近中性溶液中的电化学行为”，腐蚀科学与防护技术, 13（6）, p318, 2001
238. 张丽，韩恩厚，关辉，王俭秋，柯伟，“超临界水氧化环境中材料的腐蚀研究现状”，材料导报, 15（5）, p8, 2001
239. 方丙炎，朱自勇，韩恩厚，王俭秋，柯伟，“管线钢的应力腐蚀研究现状及损伤机理”，材料导报, 15（12）, p1, 2001
240. 饶光斌，王俭秋，柯伟，韩恩厚, “循环应力作用下伪弹性TiNi形状记忆合金的应力应变响应”，疲劳和断裂2000, 314-318, 2000
241. 王俭秋，李劲，柯伟, " 极化和频率对A537 钢在3.5% NaCl溶液中裂纹扩展的影响", 腐蚀科学与防护技术, 9, p286, 1997
242. 王俭秋，李劲，柯伟, “A537钢在3.5% NaCl溶液中低周腐蚀的裂纹萌生行为”, 金属学报, 32, p611, 1996
243. 王俭秋，李劲，柯伟, “极化对A537钢低周腐蚀疲劳的位错行为的影响”, 金属学报, 32, p730, 1996
244. 魏学军, 李劲，王俭秋，柯伟, “疲劳载荷下裂尖形变的实验研究”, 金属学报, 32, p38, 1996
245. 王俭秋，李劲，柯伟, 王中光, “超纯铁素体不锈钢在3.5% NaCl 溶液中腐蚀疲劳裂纹萌生”, 金属学报, 31, p103, 1995
246. 王政富, 李劲，王俭秋，柯伟, “工业纯铁在3.5% NaCl 水溶液中裂尖材料溶解速率与裂纹扩展速率的关系”, 腐蚀科学与防护技术, 7, p35, 1995
247. 王政富，李劲，王俭秋，柯伟, “应变幅和应变速率在形变加速腐蚀过程中的作用”, 金属学报, 30, p213, 1994
