论文题目 |
作者 |
刊物名称 |
发表年度 |
论文编号 |
3D ToF‐SIMS view of interfacial diffusion between Cr2AlC coating and zircaloy substrate |
Zhang L, Dai C L, Zhang J |
SURFACE AND INTERFACE ANALYSIS |
2020 |
|
In Situ construction of hierarchical diamond supported on carbon nanowalls_diamond for enhanced electron field emission |
Zhai Z F, Huang N, Yang B, Liu L S, Li H N, Chen J N, Zhang B S, Jiang X |
ACS Applied Materials & Interfaces |
2020 |
|
Nanostructured boron-doped diamond electrode for seawater salinity detection |
Shi D, Huang N, Liu L S, Yang B, Zhai Z F, Wang Y B, Yuan Z Y, Li H, Gai Z G, Jiang X |
Applied Surface Science |
2020 |
|
New multilayered diamond_β-SiC composite architectures for high-performance hard coating |
Yuan Z Y, Guo Y N, Li C H, Liu L S, Yang B, Song H Z, Zhai Z F, Lu Z G, Li H, Staedler T, Huang N, Jiang X |
Materials & Design |
2020 |
|
金刚石薄膜连续制备的热丝化学气相沉积设备研制 |
刘鲁生,翟朝峰,杨兵,宋昊哲,于岐,史丹,袁子尧,卢志刚,陈滨,周美琪,李海宁,喻彪,黄楠,姜辛 |
真空 |
2020 |
|
Enhanced and switchable silicon-vacancy photoluminescence in air-annealed nanocrystalline diamond films |
Yang B, Yu B, Li H N, Huang N, Liu L S, Jiang X |
Carbon |
2020 |
|
Superhydrophobic diamond-coated Si nanowires for application of anti-biofouling |
Long W J, Li H N, Yang B, Huang N, Liu L S, Gang Z G, Jiang X |
Journal of Materials Science & Technology |
2020 |
|
Deposition of highly adhesive nanocrystalline diamond films on Ti substrates via diamond/SiC composite interlayers |
Yang B, Li H N, Yu B, Huang N, Liu L S, Jiang X |
Diamond & Related Materals |
2020 |
|
In Situ Passivation on Rear Perovskite Interface for Efficient and Stable Perovskite Solar Cells |
Wang G X,Wang L P,Qiu J H,Yan Z,Li C J,Dai C L, Zhen C,Tai K P,Yu W,Jiang X |
ACS Applied Materials & Interfaces |
2020 |
|
Potassium-Induced Phase Stability Enables Stable and Efficient Wide-Bandgap Perovskite Solar Cells |
Wang L P, Wang G X, Yan Z,Qiu J H, Jia C X, Zhang W M, Zhen C, Xu C, Tai K P, Jiang X, Yang S H |
Solar RRL |
2020 |
|
Material and Interface Engineering for High-Performance Perovskite Solar Cells: A Personal Journey and Perspective |
Qiu J H, Yang S H |
The Chemical Record |
2020 |
|
Investigation of catalyst-assisted growth of nonpolar GaN nanowires via a modified HVPE process |
Zhang C, Liu X Y, Li J, Zhang X L, Yang W J, Jin X, Liu F, Yao J L, Jiang X, Liu B D |
Nanoscale |
2020 |
|
Design and Integration of a Layered MoS2/GaN van der Waals Heterostructure for Wide Spectral Detection and Enhanced Photoresponse |
Zhang X L, Li J, Ma Z Y, Zhang J, Leng B, Liu B D |
ACS Applied Materials & Interfaces |
2020 |
|
Enhanced optoelectronic performance of 3C–SiC/ZnO heterostructure photodetector based on Piezo-phototronic effect |
Zhang X L, Wang H W, Zhang J, Li J X, Ma Z Y, Li J, Leng B, Niu P J, Liu B D |
Nano Energy |
2020 |
|
In Situ Grown Monolithic Au/TiO2 Catalysts on Flexible Ti Mesh for Efficient Low-Temperature CO Oxidation |
Wang K, Liu X Y, Tang X Y, Jin X, Yang W J, Wang J C, Li J, Zhang X L, Liu B D |
Advanced Materials Technologies |
2020 |
|
Simultaneous detection of trace Ag(I) and Cu(II) ions using homoepitaxially grown GaN micropillar electrode |
Liu Q Y, Li J, Yang W J, Zhang X L, Zhang C, Labbe C, Portier X, Liu F, Yao J L, Liu B D |
Analytica Chimica Acta |
2020 |
|
Band-Gap Tunable 2D Hexagonal (GaN)1?x(ZnO)x Solid-Solution Nanosheets for Photocatalytic Water Splitting |
Li J, Yang W J, Wu A M, Zhang X L, Xu T T, Liu B D |
ACS Applied Materials & Interfaces |
2020 |
|
Microstructure and bioactivity of a cold sprayed rough/porous Ta
coating on Ti6Al4V substrate |
Tang J R,Zhao Z P,Cui X Y,Wang J Q,Xiong T Y |
SCIENCE CHINA -
Technological Sciences |
2020 |
|
Microstructural evolutions and mechanical characteristics of Ti/steel clad plates fabricated through cold spray additive manufacturing followed by hot-rolling and annealing |
Zhao Z P,Naeem ul Haq Tariq,Tang J R,Jia C L,Qiu X,Ren Y P,Liu H H,Shen Y F,Du H,Cui X Y,Wang J Q,Xiong T Y |
Materials & Design |
2020 |
|
Influence of annealing on the microstructure and mechanical properties of Ti/steel clad plates fabricated via cold spray additive manufacturing and hot-rolling |
Zhao Z P,Naeem ul Haq Tariq,Tang J R,Ren Y P,Liu H H,Tong M,Yin L S,Du H,Wang J Q,Xiong T Y |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
2020 |
|
Effect of rolling temperature on microstructure and mechanical properties of Ti/steel clad plates fabricated by cold spraying and hot-rolling |
Zhao Z P,Naeem ul Haq Tariq,Liu H S,Liu H H,Ren Y P,Tong M,Yin L S,Du H,Wang J Q,Xiong T Y |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
2020 |
|
A hybrid approach to improve microstructure and mechanical properties of cold spray additively manufactured A380 aluminum composites |
Qiu X,Naeem ul Haq Tariq,Qi L,Wang J Q,Xiong T Y |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
2020 |
|
Influence of particulate morphology on microstructure and tribological properties of cold sprayed A380/Al2O3 composite coatings |
Qiu X,Naeem ul Haq Tariq,Qi L,Tang J R,Cui X Y,Du H,Wang J Q,Xiong T Y |
Journal of Materials Science?&?Technology |
2020 |
|
Corrosion behavior of SS316L in ternary Li2CO3-Na2CO3-K2CO3 eutectic mixture salt for concentrated solar power plants |
Luo J,Deng C K,Naeem ul Haq Tariq,Li N,Han R F,Liu H H,Wang J Q,Cui X Y,Xiong T Y |
Solar Energy Materials and Solar Cells |
2020 |
|
Corrosion behavior of the electroless Ni-P coating on the pore walls of the lotus-type porous copper |
Cui C Y,Hao D,Liu H S,Xiong T Y |
Corrosion Science |
2020 |
|
Improvement on compressive properties of lotus-type porous copper by a nickel coating on pore walls |
Du H,Cui C Y,Liu H S,Song G H,Xiong T Y |
Journal of Materials Science & Technology |
2020 |
|
Microstructure and corrosion behavior of cold-sprayed Zn-Al composite coating |
Zhao Z P,Tang J R,Naeem ul Haq Tariq,Wang J Q,Cui X Y,Xiong T Y |
Coatings |
2020 |
|
Exploring the strength and ductility improvement of Cu–Al alloys |
C.X. Ren, Q. Wang*, J.P. Hou, Z.J. Zhang, H.J. Yang, Z.F. Zhang* |
Materials Science and Engineering: A |
2020 |
|
Revealing the maximum microhardness and thickness of hardened layers for copper with various grain sizes |
C.X. Ren, Q. Wang*, J.P. Hou, Z.J. Zhang, H.J. Yang, Z.F. Zhang*. |
Materials Science and Engineering: A |
2020 |
|
Mechanism transition of cross slip with stress and temperature in face-centered cubic metals |
Li K Q, Zhang Z J, Yan J X, Yang J B, Zhang Z F |
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY |
2020 |
|
Pressure effect on core structures and yield behaviors of <111> screw superdislocations in FeAl |
Yan J X, Zhang Z J, Li K Q, Xia Z Y, Yang J B, Zhang Z F |
JOURNAL OF ALLOYS AND COMPOUNDS |
2020 |
|
Simulation of the interaction between two different 1/2 < 111 > screw dislocations in body-centered-cubic metal niobium |
Xia Z Y, Zhang Z J, Yan J X, Yang J B, Zhang Z F |
COMPUTATIONAL MATERIALS SCIENCE |
2020 |
|
Heterogeneous microstructure and voids dependence of tensile deformation in a selective laser melted AlSi10Mg alloy |
Ben D D,Ma Y R, Yang H J, Shao X H, Liu H Q,Wang S G,Duan Q Q,Zhang Z F |
Materials Science & Engineering A |
2020 |
|
Anisotropic Electroplastic Effects on the Mechanical Properties
of a Nano Lamellar Austenitic Stainless Steel |
Ma Y R, Yang H J, Ben D D, Shao X H, Tian Y Z, Wang Q,Zhang Z F |
Acta Metallurgica Sinica (English Letters) |
2020 |
|
Effect of Pt-Al bond-coat on the tensile deformation and fracture behaviors of a second-generation SX Ni-based superalloy at elevated temperatures |
Tao X P, Wang X G, Zhou Y Z, Tan K J, Liang J J, Yang Y H, Liu J L, Liu J D, Li J G, Sun X F |
Surface and Coatings Technology |
2020 |
|